Another exclusive offering only from The Model Railroad Benchwork Store!
Tired of setting your DCC or DC controllers on the corner of your layout? Not only are they unsightly and detract from the look of your Model Railroad, but also the cord and wiring can inadvertently get snagged, and your expensive controller ends up on the floor. Under layout tables are cumbersome and take up space, and you have to deal with either rolling or sliding them out from underneath to use them each time.
Fortunately, The Model Railroad Benchwork Store has come with both a practical and aesthetically pleasing solution to the problem.
Our new Single and Double Controller Drawers Kits provide a convenient under table location for placing your DCC or DC controllers that takes up minimal space and becomes an integral part of your Model Railroad benchwork.
Quality and Funtionality
Made entirely from birch plywood, they also feature rabbet grooves for the 1/4″ drawer bottoms for the ultimate in strength and ease of assembly. Our controller drawers also use 14″ full extension ball bearing drawer glides for smooth operation.
Add one to your new purchase, or you can even retrofit them to your existing benchwork in most cases. Assembling and installing one only takes about 30 minutes.
Single Controller Drawer inside widths are between 11-1/4″ to 14-3/4″ wide, and Double Controller Drawers are between 25-5/8″ to 30-3/8″. Actual width varies on the length of the benchwork, and for retrofit applications depends on your actual cross member spacing. They are designed for 3-1/2″ height clearance to the bottom of your benchwork, taller heights can be accommodated on request.
Now you have a convenient and practical place to keep your controllers or use them as regular drawers for storing whatever you like. See them both at The Model Railroad Benchwork Store today and say goodbye to your controller location headaches.
PDF Benchwork Plan Packages, Digital PDF Model Railroad Table Plan Packages, “PRO” Digital Benchwork Plan Packages, Model Railroad Benchwork Cut List & Plan Generator, EZ-FOLD NTRAK Modules, EZ-FOLD Free-Mo Modules, and The Model Railroad Benchwork Store are Trademarks of The Model Railroad Benchwork Store/Model Railway Techniques.com and may not be reproduced, copied, or redistributed in any way without prior written consent by The Model Railroad Benchwork Store/Model Railway Techniques.com
Copyright 2026 The Model Railroad Benchwork Store/Model Railway Techniques.com All Rights Reserved
Last Updated on 6 months ago ago by James from Model Railway Techniques
